Port-Channel Command; Qos Command; Rmon Command - Planet FGSW-2840 User Manual

6.3.13 port-channel Command

Description:
EtherChannel configuration
Syntax:
port-channel load-balance { src-dst-mac | src-dst-ip }
no port-channel load-balance

6.3.14 qos Command

Description:
Configure quality of service (QoS) on the device
Syntax:
qos cos
no qos cos
qos dscp
no qos dscp
qos queue cos-map { tag/cos-id } { tc-id }
no qos queue cos-map
qos queue dscp-map { dscp-list } { tc-id }
no qos queue dscp-map
qos queue mode { sp | wrr | sp+wrr | equ }
no qos queue mode

6.3.15 rmon Command

Description:
SNMP RMON configuration
Syntax:
rmon alarm index interface { fastEthernet port | gigabitEthernet port } [ alarm-variable { drop | revbyte | revpkt | bpkt | mpkt |
crc-lign | undersize | oversize | fragment | jabber | collision | 64 | 65-127 | 128-511 | 512-1023 | 1024-10240 }] [ s-type
{ absolute | delta} ] [ rising-threshold r-hold ] [ rising-event-index r-event ] [ falling-threshold f-hold ] [ falling-event-index f-event ]
[ a-type { rise | fall | all }] [ owner owner-name ] [ interval interval ]
no rmon alarm index
rmon event index [ user user-name ] [ description descript ] [ type { none | log | notify | log-notify }] [ owner owner-name ]
no rmon event index
rmon history index interface { fastEthernet port | gigabitEthernet port } [ interval seconds ] [ owner owner-name ]
User's Manual of FGSW-2840 / FGSW-4840S
249