Snmp - Planet BM-2010 User Manual

¨
Name: Name of this service. For example, www, http or telnet.
¨
Protocol: Choose which kind of protocol this service use. For example, Telnet is using TCP; voice data
transmission like PLANET VoIP gateway, is using UDP.
¨
Monitor: Enable or disable to monitor this type of traffic flow and show on the report function.
¨
Port Number: enter the port number this service use. For example, Telnet will use port 23, http will use
port 80, PLANET VoIP gateway is using 30000 to 30100 by default.
¨
Description: Additional description of this service.
¨
Save/Cancel: Press save button to save above configurations and Cancel button to discard your
configurations.
After clicking Save or Cancel button, the Service Catalog page will be shown again. To edit the service you
have configured, please click Modify button on the Action field. To remove the service you have configured,
please click Delete button on the Action field.

4.1.7 SNMP

Use the SNMP Configuration screen to display and modify parameters for the Simple Network Management
Protocol (SNMP). The device includes an on-board SNMP agent which monitors the status of its hardware, as
well as the traffic passing through it. A computer attached to the network, called a Network Management
Station (NMS), can be used to access this information. Access rights to the agent are controlled by community
string. To communicate with the device, the NMS must first submit a valid community string for authentication.
BM-2010 / BM-2100 Bandwidth Manager User's Manual
- 15 -