Tracert - Planet FGSW-2840 User Manual

4.10.4.2 Tracert

The Tracert test function is used to test the connectivity of the gateways during its journey from the source to destination of the
test data. When malfunctions occur to the network, it can locate trouble spot of the network with this tracert test. The screen in
Figure 4-10-15 appears.
The page includes the following fields:
Object
Tracert Config
 Destination IP
 Max Hop
Tracert Result
 Tracert Result
Buttons
: Click to start the tracert function.
: Click to display help web page.
Figure 4-10-15: Tracert Page Screenshot
Description
Enter the IP address of the destination device.
Specify the maximum number of the route hops the test data can pass through.
Display the tracert result.
233
User's Manual of FGSW-2840 / FGSW-4840S