Switch Rear Panel - Planet FGSW-2840 User Manual

■ 10/100/1000Base-T Interfaces (Port 49 to port 50)
LED
Color
1000
Green
LNK/ACT
10/100
Orange
LNK/ACT
■ 1000Base-X SFP Interfaces (Port 51 to port 52)
LED
Color
LNK/ACT Green

2.1.3 Switch Rear Panel

The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-1-5 & Figure 2-1-6
Rear Panel
Rear Panel
■ AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch's power supply automatically adjusts
to line power in the range of 100-240V AC and 50/60Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electric service outlet and the power will be ready.
The device is a power-required device, which means it will not work till it is powered. If your networks
should be active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
Power Notice:
It will prevent you from network data loss or network downtime.
Lights: To indicate the link through that port is successfully established at 1000Mbps.
Blink: To indicate that the Switch is actively sending or receiving data over that port.
To indicate the link through that port is successfully established at 10Mbps or 100Mbps.
Lights:
To indicate that the Switch is actively sending or receiving data over that port.
Blink:
Lights: To indicate the link through that port is successfully established at 1000Mbps.
Blink: To indicate that the Switch is actively sending or receiving data over that port.
shows the rear panel of this Managed Switch.
Figure 2-1-5: Rear Panel of FGSW-2840
Figure 2-1-6: Rear Panel of FGSW-4840S
User's Manual of FGSW-2840 / FGSW-4840S
Function
Function
20