4.6.1.2 Port Config
This page allows to configure the per port IGMP feature of Managed Switch; the screen in
The page includes the following fields:
Object
Port Config
Port Select
Select
Port
IGMP Snooping
Fast Leave
LAG
Fast Leave on the port is effective only when the host supports IGMPv2 or IGMPv3.
When both Fast Leave feature and Unknown Multicast Discard feature are enabled, the leaving
of a user connected to a port owning multi-user will result in the other users intermitting the
multicast business.
Figure 4-6-7: Port Config Page Screenshot
Description
Click the Select button to quickly select the corresponding port based on the port
number entered.
Select the desired port for IGMP Snooping feature configuration. It is multi-optional.
Displays the port of the Managed Switch.
Select Enable/Disable IGMP Snooping for the desired port.
Select Enable/Disable Fast Leave feature for the desired port. If Fast Leave is
enabled for a port, the Managed Switch will immediately remove this port from the
multicast group upon receiving IGMP leave messages.
Displays the LAG number which the port belongs to.
143
User's Manual of FGSW-2840 / FGSW-4840S
Figure 4-6-7
appears.