4.10.3.1 Cable Test
The Managed Switch supports logs output to two directions, namely, log buffer and log file, the information in log buffer will be
lost after the Managed Switch is rebooted or powered off, whereas the information in log file will be kept effective even the
Managed Switch is rebooted or powered off. The Log Table displays the system log information in log buffer and the screen in
Figure 4-10-11
appears.
The page includes the following fields:
Object
Cable Test
Port
Pair
Status
Length
Error
Buttons
: Click to start the cable test function.
: Click to display help web page.
Figure 4-10-11: Cable Test Page Screenshot
Description
Select the port for cable testing.
Displays the Pair number.
Displays the connection status of the cable connected to the port. The test results of
the cable include normal, close, open or impedance.
If the connection status is normal, here displays the length range of the cable.
If the connection status is close, open or impedance, here displays the error length of
the cable.
228
User's Manual of FGSW-2840 / FGSW-4840S