Refresh Rate
Statistics
Port Select
Receviced
Sent
Broadcast
Multicast
Unicast
Alignment Errors
UndersizePkts
Pkts64Octets
Pkts65to127Octets
Pkts128to255Octets
Pkts256to511Octets
Pkts512to1023Octets
PktsOver1023Octets
Collisions
Enter a value in seconds to specify the refresh interval.
Enter a port number and click the Select button to view the traffic statistics of the
corresponding port.
Displays the details of the packets received on the port.
Displays the details of the packets transmitted on the port.
Displays the number of good broadcast packets received or transmitted on the port.
The error frames are not counted in.
Displays the number of good multicast packets received or transmitted on the port.
The error frames are not counted in.
Displays the number of good unicast packets received or transmitted on the port.
The error frames are not counted in.
Displays the number of the received packets that have a bad Frame Check
Sequence (FCS). The length of the packet is from 64 bytes to maximal bytes of the
jumbo frame (usually 10240 bytes).
Displays the number of the received packets (excluding error packets) that are less
than 64 bytes long.
Displays the number of the received packets (including error packets) that are 64
bytes long.
Displays the number of the received packets (including error packets) that are
between 65 and 127 bytes long.
Displays the number of the received packets (including error packets) that are
between 128 and 255 bytes long.
Displays the number of the received packets (including error packets) that are
between 256 and 511 bytes long.
Displays the number of the received packets (including error packets) that are
between 512 and 1023 bytes long.
Displays the number of the received packets (including error packets) that are over
1023 bytes.
Displays the number of collisions experienced by a port during packet
transmissions.
84
User's Manual of FGSW-2840 / FGSW-4840S