This section describes the hardware features and installation of the Managed Switch on the desktop or rack mount. For easier
management and control of the Managed Switch, familiarize yourself with its display indicators, and ports. Front panel
illustrations in this chapter display the unit LED indicators. Before connecting any network device to the Managed Switch, please
read this chapter completely.
2.1 Hardware Description
2.1.1 Switch Front Panel
The front panel provides a simple interface monitoring the Managed Switch.
Managed Switch.
Front Panel
Front Panel
■ Fast Ethernet TP Interface
10/100Base-TX Copper, RJ-45 Twist-Pair: Up to 100 meters.
■ Gigabit TP Interface
10/100/1000Base-T Copper, RJ-45 Twist-Pair: Up to 100 meters.
■ 1000Base-X SFP Slots (FGSW-4840S)
Each of the SFP (Small Form-factor Pluggable) slot supports Dual-speed, 1000Base-SX / LX.
-
For 1000Base-SX/LX SFP transceiver module: From 550 meters (Multi-mode fiber), up to 10/20/30/40/50/60/70/120
kilometers (Single-mode fiber).
■ 100/1000Base-X SFP Slots (FGSW-2840)
Each of the SFP (Small Form-factor Pluggable) slot supports Dual-speed, 1000Base-SX / LX or 100Base-FX.
-
For 1000Base-SX/LX SFP transceiver module: From 550 meters (Multi-mode fiber), up to 10/20/30/40/50/60/70/120
kilometers (Single-mode fiber).
-
For 100Base-FX SFP transceiver module: From 2 kilometers (Multi-mode fiber), up to 20/40/60 kilometers
(Single-mode fiber).
Figure 2-1-1: FGSW-2840 Front Panel
Figure 2-1-2: FGSW-4840S Front Panel
17
User's Manual of FGSW-2840 / FGSW-4840S
2. INSTALLATION
Figure 2-1-1 & 2-1-2
shows the front panel of the