Logout Command; Loopback Command; Ping Command; Tracert Command - Planet FGSW-2840 User Manual

6.1.3 logout command

Description:
Logout the system
Syntax:
logout

6.1.4 loopback Command

Description:
The loopback interface command is used to test whether the port is available or not
Syntax:
loopback interface { fastEthernet port | gigabitEthernet port } { internal | external }

6.1.5 ping command

Description:
The ping command is used to test the connectivity between the Managed Switch and one node of the network
Syntax:
ping A.B.C.D - Destination IP address

6.1.6 tracert command

Description:
The tracert command is used to test the connectivity of the gateways during its journey from the source to destination of the
test data
Syntax:
tracert {ip-addr} [maxHops]

6.1.7 exit command

Description:
The exit command is used to return to the previous Mode from the current Mode
Syntax:
exit
User's Manual of FGSW-2840 / FGSW-4840S
240