CipherLab 1663 User Manual page 217

3) Read the following barcodes in sequence for the scanner to enter the download mode.
The scanner will respond with beeps to indicate it is ready for downloading.
4) Run the download utility "ProgLoad.exe" on your computer.
Kernel Program
K1663_V*.shx
5) After upgrading kernel, you will need to manually restart the scanner.
After upgrading the user program, the scanner will automatically restart itself once
the download is completed successfully.
Note: The output interface remains unchanged as specified in step 2 (=Bluetooth
Enter Setup
User Program
STD1663_V*.shx
For the
"RS-232" and the correct COM port for
Bluetooth
Ignore the baud rate setting.
For the file option, click [Browse] to select
the target file for firmware update.
Click [OK].
Update
Appendix I Firmware Upgrade
Download
communication settings,
®
SPP interface.
select
®
SPP).
205