Simple Pairing For Iphone/Ipad; Transmit Speed - CipherLab 1663 User Manual

Chapter 2 Selecting Output Interface

2.1.9 SIMPLE PAIRING FOR IPHONE/IPAD

The required window of pairing passcode is always pop-up when you are using a
® ®
Bluetooth connection to iPhone or iPad. Scan the barcode below to enable Bluetooth
simple pairing for iOS so that the passcode required window will not be appeared during
a connection. You can connect to iPhone/iPad more quickly. By default, this function is
set to Disable.
*Disable
Enable
®
Note: Simple pairing only supports to the device with Bluetooth v2.1 or later.

2.1.10 TRANSMIT SPEED

By default, the BT HID transmit speed is set to normal. Users can have the scanner work
in quicker transmit speed by reading the Fast barcode.
*Normal
Fast
Note: Data loss may occur while transmitting data continuously with Fast mode enabled
in the Android platform. Therefore, it's recommended to employ the Normal mode for
Android-based devices.
67
Update