CipherLab 1663 User Manual page 121

11) Now the target scanner will be listed as below.
You can have up to seven scanners connected to one computer at the same time.
Click to remove the selected item
Note: When any changes are made to authentication and PIN code on the scanner side,
or you want to change to use Bluetooth
scanner from the paired device list (called unpairing) and go through the whole
process to re-establish the connection.
12) Run the desired application on your computer, such as HyperTerminal.exe if using Bluetooth
SPP or Notepad.exe if using Bluetooth
The status of the scanner listed on the device list will be updated to "Connected", indicating
the WPAN connection is established successfully via the outgoing COM port if using
®
Bluetooth SPP.
Note: Even though the scanner is connected to the host with authentication disabled (=
no PIN code required), the host may still request a PIN code while the application
is opening COM port. Dynamic input of PIN code is supported so that you may
input a matching PIN code on the scanner. Refer to
Random PIN.
Chapter 3
®
HID, it is suggested that you remove the
®
HID.
Update
Set up a WPAN Connection
Disable Authentication or Use
®
109