Usb Virtual Com Via 3610; Activate Usb Virtual Com; Inter-Function Delay - CipherLab 1663 User Manual

2.5 USB VIRTUAL COM VIA 3610

Connect 3610 to the USB port of PC, and then connect the scanner to 3610. You may run
HyperTerminal.exe on the computer to view and capture the data transmission from the
scanner.

2.5.1 ACTIVATE USB VIRTUAL COM

Note: If you are using USB Virtual COM for the first time, you must install its driver from
the CD-ROM. Driver version 5.4 or later is required. Please remove older versions
before installing new ones!

2.5.2 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of milliseconds, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
1) Read the barcode above to specify the inter-function delay.
2) Read the "Decimal
milliseconds).
3) Read the "Validate" barcode on the same page to complete this setting.
Value" barcode on page 219 for the desired inter-function delay (in
Chapter 2 Selecting Output Interface
Activate 3610
USB Virtual COM
Inter-Function
Delay... (*0~254)
Update
83