CipherLab 1663 User Manual page 22

1663 Barcode Scanner
Working Mode
Upon powering up, the scanner will try to establish a connection with 3610 or a computer with
®
Bluetooth wireless technology. Refer to
connection between the scanners and 3610 is made easy and reliable. Now, it also supports
®
Bluetooth SPP Master Mode as an alternative. Refer to
Note: If USB Virtual COM or Bluetooth
directly send serial commands to configure the scanner. For example, run
HyperTerminal.exe and type the 6-digit command located under each setup
barcode. Refer to
10
User Guide
Chapter 3 - Set up a WPAN Connection
®
Appendix II Host Serial
2.3 Bluetooth® SPP
SPP is selected for output interface, the host can
Commands.
for details. The
Master.
Enter Setup