Configuring Switch Management Ip Address - ZyXEL Communications MES3500 Series User Manual

Figure 29 Initial Setup Network Example: Port VID
Click Advanced Applications >
1
VLAN in the navigation panel. Then
click the VLAN Port Setting link.
Enter 2 in the PVID field for port 1
2
and click Apply to save your changes
back to the run-time memory.
Settings in the run-time memory are
lost when the Switch's power is
turned off.
5.2 Configuring Switch
Management IP Address
The default management IP address of the Switch is 192.168.1.1. You can configure another IP
address in a different subnet for management purposes. The following figure shows an example.
Figure 30 Initial Setup Example: Management IP Address
Connect your computer to the Switch's port which is not in VLAN 2.
1
Chapter 5 Initial Setup Example
MES3500/MGS3520 Series User's Guide
45