ZyXEL Communications MES3500 Series User Manual page 283

Table 128 SNMP InterfaceTraps (continued)
OPTION OBJECT LABEL
transceiver-ddm zyTransceiverDdmiTemperatur
eOutOfRange
zyTransceiverDdmiTxPowerOut
OfRange
zyTransceiverDdmiRxPowerOut
OfRange
zyTransceiverDdmiVoltageOut
OfRange
zyTransceiverDdmiTxBiasOutOf
Range
zyTransceiverDdmiTemperatur
eOutOfRangeRecovered
zyTransceiverDdmiTxPowerOut
OfRangeRecovered
zyTransceiverDdmiRxPowerOut
OfRangeRecovered
zyTransceiverDdmiVoltageOut
OfRangeRecovered
zyTransceiverDdmiTxBiasOutOf
RangeRecovered
Chapter 38 Access Control
OBJECT ID
1.3.6.1.4.1.890.1.15.3.84.3.1
1.3.6.1.4.1.890.1.15.3.84.3.2
1.3.6.1.4.1.890.1.15.3.84.3.3
1.3.6.1.4.1.890.1.15.3.84.3.4
1.3.6.1.4.1.890.1.15.3.84.3.5
1.3.6.1.4.1.890.1.15.3.84.3.6
1.3.6.1.4.1.890.1.15.3.84.3.7
1.3.6.1.4.1.890.1.15.3.84.3.8
1.3.6.1.4.1.890.1.15.3.84.3.9
1.3.6.1.4.1.890.1.15.3.84.3.10
MES3500/MGS3520 Series User's Guide
283
DESCRIPTION
This trap is sent when the
transceiver temperature is above or
below the normal operating range.
This trap is sent when the
transmitted optical power is above
or below the normal operating
range.
This trap is sent when the received
optical power is above or below the
normal operating range.
This trap is sent when the
transceiver supply voltage is above
or below the normal operating
range.
This trap is sent when the
transmitter laser bias current is
above or below the normal
operating range.
This trap is sent when the
transceiver temperature is
recovered from the out of normal
operating range.
This trap is sent when the
transmitted optical power is
recovered from the out of normal
operating range.
This trap is sent when the received
optical power is recovered from the
out of normal operating range.
This trap is sent when the
transceiver supply voltage is
recovered from the out of normal
operating range.
This trap is sent when the
transmitter laser bias current is
recovered from the out of normal
operating range.