Configuring Switch Management Ip Address - ZyXEL Communications XS3800-28 User Manual

Figure 32 Initial Setup Network Example: Port VID
Click Advanced Applications > VLAN > VLAN
1
Configuration in the navigation panel. Then
click the VLAN Port Setup link.
Enter 2 in the PVID field for port 1 and click
2
Apply to save your changes back to the run-
time memory. Settings in the run-time memory
are lost when the Switch's power is turned off.

5.1.3 Configuring Switch Management IP Address

The default management IP address of the Switch is 192.168.1.1. You can configure another IP address in
a different subnet for management purposes. The following figure shows an example.
Chapter 5 Initial Setup Example
XS3800-28 User's Guide
61