Maintenance; Chapter 37 Maintenance; The Maintenance Screen - ZyXEL Communications MES3500 Series User Manual

This chapter explains how to configure the screens that let you maintain the firmware and
configuration files.

37.1 The Maintenance Screen

Use this screen to manage firmware and your configuration files. Click Management >
Maintenance in the navigation panel to open the following screen.
Figure 172 Management > Maintenance
The following table describes the labels in this screen.
Table 118 Management > Maintenance
LABEL
Current
Firmware
Upgrade
Restore
Configuration
Backup
Configuration
Load Factory
Default
Save
Configuration
Reboot
System
DESCRIPTION
This field displays which configuration (Configuration 1 or Configuration 2) is currently
operating on the Switch.
Click Click Here to go to the Firmware Upgrade screen.
Click Click Here to go to the Restore Configuration screen.
Click Click Here to go to the Backup Configuration screen.
Click Click Here to reset the configuration to the factory default settings.
Click Config 1 to save the current configuration settings to Configuration 1 on the Switch.
Click Config 2 to save the current configuration settings to Configuration 2 on the Switch.
Click Config 1 to reboot the system and load Configuration 1 on the Switch.
Click Config 2 to reboot the system and load Configuration 2 on the Switch.
Note: Make sure to click the Save button in any screen to save your settings to the current
configuration on the Switch.
MES3500/MGS3520 Series User's Guide
268
C
HAPTER

Maintenance

3 7