Change Your Password - ZyXEL Communications MES3500 Series User Manual

Table 5 Navigation Panel Links (continued)
LINK
VLAN Mapping
Layer 2 Protocol
Tunneling
sFlow
PPPoE
Errdisable
Private VLAN
IP Application
Static Routing
DiffServ
DHCP
Management
Maintenance
Access Control
Diagnostic
Syslog
Cluster
Management
MAC Table
ARP Table
Configure Clone

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.
Chapter 4 The Web Configurator
DESCRIPTION
This link takes you to screens where you can configure VLAN mapping settings on the
Switch.
This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling)
settings on the Switch.
This link takes you to screens where you can configure sFlow settings on the Switch.
This link takes you to screens where you can configure how the Switch gives a PPPoE
termination server additional subscriber information that the server can use to identify
and authenticate a PPPoE client.
This link takes you to a screen where you can configure CPU protection and error disable
recovery.
This link takes you to a screen where you can block traffic between ports in a VLAN on the
Switch.
This link takes you to a screen where you can configure static routes. A static route
defines how the Switch should forward traffic by configuring the TCP/IP parameters
manually.
This link takes you to screens where you can enable DiffServ, configure marking rules and
set DSCP-to-IEEE802.1p mappings.
This link takes you to screens where you can configure the DHCP settings.
This link takes you to screens where you can perform firmware and configuration file
maintenance as well as reboot the system.
This link takes you to screens where you can change the system login password and
configure SNMP and remote management.
This link takes you to screens where you can view system logs and can test port(s).
This link takes you to screens where you can setup system logs and a system log server.
This link takes you to a screen where you can configure clustering management and view
its status.
This link takes you to a screen where you can view the MAC address and VLAN ID of a
device attached to a port. You can also view what kind of MAC address it is.
This link takes you to a screen where you can view the MAC address – IP address
resolution table.
This link takes you to a screen where you can copy attributes of one port to (an)other
port(s).
MES3500/MGS3520 Series User's Guide
39