Dhcp Snooping - ZyXEL Communications MES3500 Series User Manual

Figure 118 IP Source Guard Static Binding
The following table describes the labels in this screen.
Table 77 IP Source Guard Static Binding
LABEL
MAC Address
IP Address
VLAN
Port
Add
Cancel
Clear
Index
MAC Address
IP Address
Lease
Type
VLAN
Port
Delete
Cancel

26.4 DHCP Snooping

Use this screen to look at various statistics about the DHCP snooping database. To open this screen,
click Advanced Application > IP Source Guard > DHCP Snooping.
Chapter 26 IP Source Guard
DESCRIPTION
Enter the source MAC address in the binding.
Enter the IP address assigned to the MAC address in the binding.
Enter the source VLAN ID in the binding.
Specify the port(s) in the binding. If this binding has one port, select the first radio button
and enter the port number in the field to the right. If this binding applies to all ports, select
Any.
Click this to create the specified static binding or to update an existing one.
Click this to reset the values above based on the last selected static binding or, if not
applicable, to clear the fields above.
Click this to clear the fields above.
This field displays a sequential number for each binding.
This field displays the source MAC address in the binding.
This field displays the IP address assigned to the MAC address in the binding.
This field displays how long the binding is valid.
This field displays how the Switch learned the binding.
static: This binding was learned from information provided manually by an administrator.
This field displays the source VLAN ID in the binding.
This field displays the port number in the binding. If this field is blank, the binding applies to
all ports.
Select this, and click Delete to remove the specified entry.
Click this to clear the Delete check boxes above.
MES3500/MGS3520 Series User's Guide
207