Arp Inspection Log Status - ZyXEL Communications MES3500 Series User Manual

Table 83 ARP Inspection VLAN Status
LABEL
Received
Request
Reply
Forwarded
Dropped

26.6.2 ARP Inspection Log Status

Use this screen to look at log messages that were generated by ARP packets and that have not
been sent to the syslog server yet. To open this screen, click Advanced Application > IP Source
Guard > ARP Inspection > Log Status.
Figure 125 ARP Inspection Log Status
The following table describes the labels in this screen.
Table 84 ARP Inspection Log Status
LABEL
Clearing log status table
Total number of logs
Index
Port
VID
Sender Mac
Sender IP
Num Pkts
Chapter 26 IP Source Guard
DESCRIPTION
This field displays the total number of ARP packets received from the VLAN since the Switch
last restarted.
This field displays the total number of ARP Request packets received from the VLAN since
the Switch last restarted.
This field displays the total number of ARP Reply packets received from the VLAN since the
Switch last restarted.
This field displays the total number of ARP packets the Switch forwarded for the VLAN since
the Switch last restarted.
This field displays the total number of ARP packets the Switch discarded for the VLAN since
the Switch last restarted.
DESCRIPTION
Click Apply to remove all the log messages that were generated by ARP packets
and that have not been sent to the syslog server yet.
This field displays the number of log messages that were generated by ARP
packets and that have not been sent to the syslog server yet. If one or more log
messages are dropped due to unavailable buffer, there is an entry called overflow
with the current number of dropped log messages.
This field displays a sequential number for each log message.
This field displays the source port of the ARP packet.
This field displays the source VLAN ID of the ARP packet.
This field displays the source MAC address of the ARP packet.
This field displays the source IP address of the ARP packet.
This field displays the number of ARP packets that were consolidated into this log
message. The Switch consolidates identical log messages generated by ARP
packets in the log consolidation interval into one log message. You can configure
this interval in the ARP Inspection Configure screen. See
217.
MES3500/MGS3520 Series User's Guide
216
Section 26.7 on page