Syslog Server Setup - ZyXEL Communications MES3500 Series User Manual

Figure 198 Management > Syslog
The following table describes the labels in this screen.
Table 141 Management > Syslog
LABEL
Syslog
Logging Type
Active
Facility
Privilege
Apply
Cancel

40.3 Syslog Server Setup

Click Management > Syslog > Syslog Server Setup to view the screen as shown next. Use this
screen to configure a list of external syslog servers.
Chapter 40 Syslog
DESCRIPTION
Select Active to turn on syslog (system logging) and then configure the syslog setting
This column displays the names of the categories of logs that the device can generate.
Select this option to set the device to generate logs for the corresponding category.
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Select a command privilege level. The Switch will only generate logs for commands that have
a privilege level greater than or equal to the specified privilege level.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
MES3500/MGS3520 Series User's Guide
303