Configure Multiple Spanning Tree Protocol - ZyXEL Communications MES3500 Series User Manual

Table 32 Advanced Application > Spanning Tree Protocol > Status: MRSTP (continued)
LABEL
Cost to Bridge
Port ID
Topology Changed
Times
Time Since Last
Change

13.8 Configure Multiple Spanning Tree Protocol

To configure MSTP, click MSTP in the Advanced Application > Spanning Tree Protocol screen.
See Section 13.1.5 on page 114
Chapter 13 Spanning Tree Protocol
DESCRIPTION
This is the path cost from the root port on this Switch to the root switch.
This is the priority and number of the port on the Switch through which this Switch must
communicate with the root of the Spanning Tree.
This is the number of times the spanning tree has been reconfigured.
This is the time since the spanning tree was last reconfigured.
for more information on MSTP.
MES3500/MGS3520 Series User's Guide
124