Table of Contents
Advertisement
Step 1. Identify the drive tray that contains the hard drive that needs to be
Step 2. Open the front flap by pushing the button at the front of the drive
Step 3. Remove the drive tray with the hard drive, gently and carefully
Step 4. Remove the four (4) retention screws located on the sides of the
Replacing a Failed Hard Drive
Chapter 5: Subsystem Maintenance and Upgrading
replaced.
tray. (See Figure 5-2) The drive tray front flap will automatically
be lifted and the drive tray will be dislodged from the chassis.
Figure 5-22: Opening the Front Flap
withdrawing the drive tray with hard drive from the chassis. (See
Figure 5-22)
Figure 5-22: Removing a Drive Tray
drive tray (two on each side.) (See Figure 5-23)
Figure 5-23: Removing the SATA Hard Drive
5-17
Advertisement
Table of Contents
