Table of Contents
Advertisement
4.4.4
LCD Screen
When powering on the subsystem, the following messages should appear on
the front panel LCD screen. Wait for the front panel LCD to show
"READY" or "No Host LUN" before the host boots up. Refer to Figure
4-4 on how to read the screens.
The LCD screen startup sequence is shown and described in the sequence
below.
Initializing....
Please Wait...
Power on Self
Test. Please Wait...
Power on
Init Completed
AR3016G
AR3016G
256MB RAM, Wait...
AR3016G
No Host LUN
Power On
Chapter 4: Subsystem Connection and Operation
Model Name
AR3016G
Ready
Status/Data Transfer Indicator
Figure 4-4: The LCD Start-up Screen
This screen appears when the PSUs are turned on.
System is performing a self test.
System power-on self test is completed.
System is accessing different interfaces.
Verifying installed cache memory.
System is ready. You can now start to configure
the subsystem.
4-9
Advertisement
Table of Contents
