Table of Contents
Advertisement
Step 4. Install the new cooling module by aligning the module with the
Step 5. Secure the module by fastening the screws you previously
Step 6. Reinstall the PSU module into chassis. When powered on, check
Cooling Module Maintenance
Chapter 5: Subsystem Maintenance and Upgrading
Figure 5-19: Removing the New Cooling Module
module bay on the PSU module and gently lowering it into. The
fan outlet should be aligned with the PSU faceplate and that the
side with screw holes should be facing up. Do this with a
precisely vertical motion so that the cooling module's connector
can correctly mat with the connector in the module bay. (See
Figure 5-20)
Figure 5-20: Installing the Cooling Module
removed.
if the cooling fan LEDs are lit. If not, that means your cooling
fans are operating properly.
5-15
Advertisement
Table of Contents
