AR3016G Installation and Hardware Reference Manual
1.4.2 Components
The following components are hot-swappable:
•
•
•
Instructions on how to replace these hot-swappable components are given
in Chapter 5.
1.4.3 Normalized Airflow
Proper subsystem cooling is referred to as "normalized" airflow.
Normalized airflow ensures the sufficient cooling of the subsystem and is
only attained when all the components are properly installed. Therefore, a
failed component should only be hot-swapped when a replacement is
available. If a failed component is removed but not replaced, permanent
damage to the subsystem can result.
1-14
PSU with cooling module
Optional BBU
Hard drive
NOTE:
Hot-swappable Components