Table of Contents
Advertisement
AR3016G Installation and Hardware Reference Manual
Step 1. To remove the cooling module, remove the PSU module first.
Step 2. Use a medium-size Phillips screwdriver to remove the six screws
Step 3. Remove the cooling fan assembly by the following steps:
5-14
Please follow the PSU removal process listed in the previous
discussion.
from the top of the PSU module. (See Figure 5-18)
Figure 5-18: Removing the Cooling Module
Make sure the PSU handle is in the down position so that you can
grab the edge of the cooling fan assembly.
Use your thumb and middle finger to seize the cooling assembly,
your thumb by the upper edge of the fan guard and your middle
finger at the hemispheric indent. (See Figure 5-19)
Tilt the fan a little bit and remove the fan assembly with a precisely
vertical motion. (See Figure 5-19)
Cooling Module Maintenance
Advertisement
Table of Contents
