Enclosure Chassis; Chassis Overview - Uniwide AR3016G Hardware User's Manual

AR3016G Installation and Hardware Reference Manual
On receiving and unpacking your subsystem, please check the package
contents against the included Unpacking List. If any modules are missing,
please contact your subsystem vendor immediately.

1.1.2 Enclosure Chassis

1.1.2.1 Chassis Overview

The AR3016G RAID storage subsystem chassis is an enhanced 3U metal
chassis divided into front and rear sections, which are respectively accessed
through front and rear panels. Pre-drilled mounting holes in the sides of the
3U RAID subsystem enclosure allow you to attach separately purchased
slide rails so that you can install the enclosure into a rack or cabinet. Please
see Figure 1-2 for the components' locations in the subsystem and read the
following sections for the front and rear panels descriptions.
Components accessed through the front panel are referred to as "Front
Panel Components" and components accessed through the rear panel are
referred to as "Rear Panel Components."
1-2
NOTE:
Figure 1-2: AR3016G Subsystem Overview
NOTE:
Product Overview