Table of Contents
Advertisement
2.5. Unpacking the Subsystem
Use the Unpacking List in your subsystem package to verify package
contents. Carefully check the items contained in each box before proceeding
with installation.
Do not rely on the non-definitive, summarized unpacking list shown
below--it is for reference only. A detailed packing list can be found in
your product shipping package or product CD.
Each packed box is separated into upper and lower levels.
Upper level: The box on the upper level contains sixteen (16) drive trays.
Lower level: Three (3) boxes are placed in the lower level. One (1) box
contains the enclosure chassis with all the pre-installed components. The
other two (2) boxes contain the power cords and accessory items.
Accessory items include an audio-jack to DB9 cable, null modem, Quick
Installation Guide, screws, and a CD containing the Installation and
Hardware Reference Manual (this document), the User's Operation
Manual (Firmware), RAIDWatch Management Software and the
RAIDWatch User's Manual.
2.6. Installation Overview
2.6.1
Pre-installed Components
The following components have been pre-installed in the AR3016G and
therefore do not need to be installed:
•
•
•
•
•
•
•
2.6.2
Uninstalled Components
You must install the following components:
•
•
Unpacking the Subsystem
WARNING!
1 - LCD module
2 – Front handles (right and left)
1 - Backplane board
1 - Controller module
1 - DDR RAM DIMM module
2 - PSUs
2 - Cooling modules
Hard drives (separately purchased SATA-II or SATA-I drives)
Drive trays
Chapter 2: Hardware Installation
2-5
Advertisement
Table of Contents
