Table of Contents
Advertisement
1.1.2.2 Physical Dimensions
The AR3016G comes in an enhanced 3U chassis with the following
dimensions:
•
•
1.1.2.3 Front Panel Overview
The front section of the subsystem features a 4x4 layout for sixteen (16) 3.5-
inch drives. The two (2) handles on the front of the subsystem enable you to
easily insert/extract the chassis into/from a rack or cabinet. The LCD panel
on the left handle provides an easy way for you to monitor and configure
your subsystem.
The front panel of the AR3016G RAID subsystem described in this manual
is shown in Figure 1-3. A description of each front panel component is
given below:
The front panel shown in Figure 1-3 accommodates the following
components:
•
•
Product Overview
With handles: 482.6mm x 131mm x 504.3mm (19 x 5.2 x 19.9
inches) (width x height x depth)
Without handles: 445mm x 130mm x 488.2mm (17.5 x 5.1 x 19.2
inches) (width x height x depth)
Figure 1-3: AR3016G Front View
Drive bays with drive tray canisters: The subsystem has sixteen
(16) drive bays in the front side of the chassis to house sixteen (16)
hard drives.
Right handle and left handle with LCD panel: These front handles
are conveniently placed and simplify moving the subsystem
enclosure into and out of a rack or cabinet. The left side front-
handle houses a 16x2 character LCD panel that can be used for
subsystem configuration, troubleshooting and status checking.
(Please refer to Section 1.2.1)
AR3016G
1-3
Advertisement
Table of Contents
