Table of Contents
Advertisement
AR3016 Installation and Hardware Reference Manual
Name
PWR
(Power)
BUSY
ATTEN
(Attention)
During the power up process, the LCD panel ATTEN LED will be turned
on. If the subsystem boots up correctly, then the ATTEN LED will be
turned off after the boot-up procedure is complete.
3.2.3 Drive Tray LEDs
Two (2) LED indicators are located on the right side of each drive tray. (See
Figure 3-2 Refer to Table 3-3 for the LED definitions. When notified by a
drive failure message, you should check the drive tray indicators to find the
correct location of the failed drive. Replacing the wrong drive can fatally
fail a logical array.
3-4
Color
ON indicates that power is being supplied to the
subsystem.
Blue
OFF indicates that no power is being supplied to
the subsystem.
FLASHING indicates that there is activity on
the host/drive channels.
White
OFF indicates that there is no actively on the
host/drive channels.
ON indicates that a component failure/status
event has occurred.
Red
OFF indicates that the subsystem and all its
components are operating correctly.
Table 3-2: LCD Panel LED Definitions
NOTE:
Figure 3-2: Drive Tray LEDs
Status
Status
HD Failed
Status-indicating LEDs
Advertisement
Table of Contents
