Uniwide AR3016G Hardware User's Manual page 34

AR3016G Installation and Hardware Reference Manual
Step 3. Install the BBU. After the metal sheet covering the BBU slot has
Step 4. Secure the BBU to the enclosure. Tighten the two (2) retention
2-8
Figure 2-3: Use a Screwdriver to Remove the Metal Sheet
been removed, the BBU can be installed. To do this, align the
BBU with the slot from which the metal sheet was removed, and
then gently push the BBU into the slot. (See Figure 2-4)
Figure 2-4: Install the BBU
screws on the back of the BBU. The BBU comes equipped with a
charger circuit. Once the BBU is properly installed, the
installation process is completed.
Installing the Optional BBU