Ip-Source-Guard Of Cli - ICPDAS MSM-6226G Console Manual

21

IP-Source-Guard of CLI

Table : IP-Source-Guard Commands
Command
Add
delete
limit
mode
port-mode
show
add
To add or modify IP source guard static entry
Syntax
add <port-list> <VLAN ID> <ip-address> <mac-address>
Parameter
<port-list> Port list, available value is from 1 to 14 format: 1,3-5..
<VLAN ID> VLAN ID, available value is from 1 to 4094
<ip-address> IP address allowed for doing IP source guard
<mac-address> MAC address, format 0a-1b-2c-3d-4e-5f
EXAMPLE
Function
Add or modify IP source guard static entry
Delete IP source guard static entry
IP source guard port limitation for dynamic entries
Configure IP source guard mode
Configure IP source guard port mode
Show IP source guard configuration