Vcl Of Cli - ICPDAS MSM-6226G Console Manual

46

VCL of CLI

Table : VCL Commands
Command
delete
mac-vlan
protocol-vlan
show
delete
To delete the configured command or VCL rule entry.
Syntax
delete < mac-vlan> <mac-address>
Parameter
<mac-vlan> Delete MAC-based VLAN entry.
<mac-address> MAC address, format 0a-1b-2c-3d-4e-5f
EXAMPLE
Syntax
delete < protocol-vlan> <ethernet > <ether type>
Parameter
<protocol-vlan> Delete protocol-based VLAN ethertype protocol to group
mapping.
Function
Delete command
Configure MAC-based VLAN membership
Configure protocol-based VLAN
Show VCL status command
The delete command was used for what you want to
N :
OTE
delete the command or entry you had set on the switch.