ICPDAS MSM-6226G Console Manual page 187

20-port 10/100/1000 base-t + 4 combo 100/1000 tp/sfp port + 2 sfp port l2 managed switch
Table of Contents

Advertisement

classified-dscp
dei Specify whether frames can hit the action according to DEI
dmac
dp Action of drop precedence level for this QCE
dport
dscp Configure DSCP for this QCE
end Finish QCE setting and return to QoS mode
exit Exit from current mode
fragment Specify the fragment offset settings for this QCE
help Show available commands
history
ip-protocol Configure IP protocol for this QCE
logout Disconnect
pcp
quit
restore
save Save running configuration
show Show QCE
sip Configure source IP address for this QCE
smac Configure source MAC address for this QCE
sport Configure Source UDP/TCP port range for this QCE
tag Specify whether frames can hit the action according to the 802.1Q
tagged
vid Specify the VLAN ID filter for this QCE
EXAMPLE
queue-shaper
Configure destination MAC address for this QCE
Configure destination UDP/TCP port range for this ACE
Show a list of previously run commands
Specify whether frames can hit the action according to PCP
Disconnect
Restore running configuration
Queue shaper
S
YNTAX
queue-shaper < excess ><port-list><queue-list> disable
Action of DSCP for this QCE

Advertisement

Table of Contents
loading

Table of Contents