Table of Contents
Advertisement
port-shaper
Parameter
enable Enable port shaper
EXAMPLE
qce
S
Parameter
<1-256> If the QCE ID parameter <qce_id> is specified and an
entry with this QCE ID already exists, the QCE will be modified. Otherwise,
a new QCE will be added
<0-256>
before this QCE in the list. If the next QCE ID is zero
<port-list> Port member for QCE
any Only Ethernet Type frames can match this QCE
etype Only Ethernet Type frames can match this QCE
ipv4 Only IPv4 frames can match this QCE
ipv6 Only IPv6 frames can match this QCE
llc
snap Only SNAP frames can match this QCE
auto-logout Configure time of inactivity before automatic logout
class Action of QoS class for this QCE
port-shaper
S
YNTAX
port-shaper <mode><port-list> <disable >
mode
Configure the port shaper mode
rate
Configure the port shaper rate
<port-list>
Port list, available value is from 1 to 10B format:1,3-
disable Disable port shaper
Add or modify QoS control entry
YNTAX
Qce <1-256><0-256> <port-list> any
If the next QCE ID is non zero, the QCE will be placed
Only LLC frames can match this QCE
Advertisement
Table of Contents
