Table of Contents
Advertisement
EXAMPLE
port-scheduler
Parameter
EXAMPLE
classification Configure DSCP classification based on QoS class and DP
level. This enables per port to map new DSCP value based on QoS class
and DP level
egress-remark Configure the port DSCP remarking mode
translation Configure DSCP ingress translation mode. If translation
is enabled for a port, incoming frame DSCP value is translated and
translated value is used for QoS classification
<port-list>
Port list, available value is from 1 to 10B format:1,3-
all
Classify all DSCP
disable Disable DSCP ingress classification
selected Classify only selected DSCP for which classification is enabled
as specified in DSCP Translation window for the specific DSCP
zero Classify DSCP if DSCP = 0
QoS egress port schedulers
S
YNTAX
port-scheduler < mode ><port-list>< strict>
mode
Configure the port scheduler mode
weight Configure the port scheduler weight
<port-list> Port list, available value is from 1 to 10B format:1,3-
strict Strict priority scheduler mode
weighted Weighted scheduler mode
Advertisement
Table of Contents
