ICPDAS MSM-6226G Console Manual page 146

p-edge <port-list> <disable/ enable>
Parameter
<port-list> Port list, available value is from 1 to 14 format: 1,3-5.
<disable> Configure MSTP adminEdge to Non-edge.
<enable> Configure MSTP adminEdge to Edge.
EXAMPLE
p-mode
To set the STP enabling for a port
Syntax
p-mode <port-list> <disable/ enable>
Parameter
<port-list> Port list, available value is from 1 to 14 format: 1,3-5.
<disable> Disable MSTP protocol.
<enable> Enable MSTP protocol..
EXAMPLE
p-p2p
To set the STP point to point port parameter
Syntax
p-p2p <port-list> <auto/ disable/ enable>
Parameter
<port-list> Port list, available value is from 1 to 14 format: 1,3-5.
<auto> Automatic MSTP point to point detection
<disable> Disable MSTP point to point.
<enable> Enable MSTP point to point..
EXAMPLE