ICPDAS MSM-6226G Console Manual page 60

EXAMPLE
leave-all
Syntax
leave-all <port-list> <timer-value>
Parameter
<port-list> Port list, available value is from 1 to 14 format: 1,3-5.
<timer-value> leave all time value, available value is from 10000 to 100000
seconds.
EXAMPLE
leave-time
Syntax
leave-time <port-list> <timer-value>
Parameter
<port-list> Port list, available value is from 1 to 14 format: 1,3-5.
<timer-value> leave time value, available value is from 600 to 1000 seconds
If you didn't set the GARP environment already then
N :
OTE
the switch will show "Set jointimer failed".
To set the GARP leave all timer configuration
If you didn't set the GARP environment already then
N :
OTE
the switch will show "Set leavealltimer failed".
To set the GARP leave timer configuration