Table of Contents
Advertisement
EXAMPLE
show
To show the SNMP configuration or detail information.
Syntax
show <access /community /group/ mode/ trap/ user/ view>
Parameter
<access> Show snmpv3 access entry.
<community> Show snmpv3 community entry.
<group> Show snmpv3 groups entry.
<mode> Show snmp configuration.
<trap> Show snmp trap entry.
<user> Show snmpv3 users entry.
<view> Show snmpv3 views entry.
EXAMPLE
trap
To configure the SNMP trap parameter, the command adds an SNMP
trap entry.
Syntax
trap <trap index> <version> <trap host IP address> <trap port> <severity
level> <security name> <security_level> <Authentication protocol>
<Authentication password>
Parameter
<trap index> Index to SNMP trap table. (Range: 1-6).
<version> SNMP trap protocol version. (v2/ v3), v2 is v2c and v3 is v3.
<trap host IP address> To set IP –Address of the management station to
receive notification messages.
Advertisement
Table of Contents
