Qos Commands Of Cli - ICPDAS MSM-6226G Console Manual

38

QoS Commands of CLI

Table :Qos Commands
Command
dscp-classification
classification
dscp-map
table. This table is used to map
based on DSCP value. DSCP value
DPL is either translated DSCP
DSCP value
dscp-rmap
remap table. This table is used if
mode is 'remap' and the
DSCP and DP level to a new DSCP
dscp-translation
DSCP translation table. If port
translation table is used
frame's DSCP value and translated
class and DP level
dscp-trust
value which is used for QoS
value to be checked for trust
DSCP translation is
Function
Configure DSCP ingress
Configure DSCP mapping
QoS class and DP level
used to map QoS class and
value or incoming frame
Configure DSCP egress
the port egress remarking
purpose is to map the
value
configure global ingress
DSCP translation is enabled,
to translate incoming
value is used to map QoS
Configure trusted DSCP
classification. The DSCP
is either translated value if
enabled for the ingress port