Table of Contents
Advertisement
S
YNTAX
list <port-list> disable/enable
Parameter
<port-list> Port list, available value is from 1 to 10B format:1,3-5
disable Frames received on the port are not logged
enable Frames received on the port are stored in the system log
EXAMPLE
mirror
S
YNTAX
list <port-list> disable/enable
Parameter
<port-list> Port list, available value is from 1 to 10B format:1,3-5
EXAMPLE
move
This command move ACE configuration between two index.
S
YNTAX
Move <1-256> <0-256>
Parameter
<1-256> ACE ID must be exist
<0-256> If the next ACE ID is non zero, the ACE will be Placed before this ACE in
the
list. If the next ACE ID is zero,the ACE will be placed last in the list.
Configure ACL port default mirror operation.
disable Frames received on the port are not logged
enable
Frames received on the port are stored in the system log
Advertisement
Table of Contents
