45
TIME of CLI
Table : TIME Commands
Command
daylight
delete
manual
ntp
show
time-zone
daylight
To indicates the Daylight Savings operation.
Syntax
daylight <disable/enable> <Time Set Offset> <By-dates/Recurring> <Day
that DST stars> <time that DST starts> <Day that DST ends> <time that DST
ends>
Parameter
<disable> Disable Daylight Savings operation.
<enable> Enable Daylight Savings operation.
<By-dates> Manually enter day and time that DST starts and ends.
<Recurring> DST occurs on the same date every year.
<Day that DST starts> DST starts date, format is YYYY:MM:DD.
<Time that DST starts> DST starts time, format is HH:MM.
<Day that DST ends> DST ends date, format is YYYY:MM:DD.
<Time that DST ends> DST ends time, format is HH:MM.
EXAMPLE
Function
Indicates the Daylight Savings operation
Delete NTP server entry
Configure system time manually
Configure system time by NTP
Show time information
Configure system time zone