Table of Contents
Advertisement
tacacs+
To configure the TACACS+ authentication server detail parameter.
Syntax
tacacs+ <index> <enable/disable> <ip-hostname> <0-65535> <Line>
Parameter
<index> The TACACS+ authentication Server index. The available value is from
1 to 5
<disable/enable> To enable or disable the TACACS+ authentication service.
<ip-hostname> The TACACS+ authentication server IP address or hostname.
<0-65535> The TACACS+ authentication server UDP port. If the port is set to 0
(zero), then the default port (1813) is used.
<LINE> Secret shared with external accounting server. The Available value is up
to 29 characters long.
EXAMPLE
If you didn't connect the TACACS+ Server already
N
:
OTE
then the switch will show "Server disconnect".
Advertisement
Table of Contents
