Table of Contents
Advertisement
ntp
To configure system time by NTP.
Syntax
ntp <mode> <disable/ enable>
Parameter
<mode> Indicates the NTP mode operation.
<disable> Disable NTP mode operation.
<enable> Enable NTP mode operation.
EXAMPLE
Syntax
ntp <server> <server index> <ipv6-address/ ip-hostname>
Parameter
<server> Indicates the NTP mode operation.
<server index> NTP server index, the available value is from 1 to 5.
<ipv6-address> NTP server ipv6 address, IPv6 address is in 128-bit records
represented as eight fields of up to four hexadecimal digits with a colon separates
each field (:)For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can only appear once. It also used a following
legally IPv4 address. For example, '::192.1.2.34'.
<ip-hostname> NTP server ip address or hostname.
EXAMPLE
Advertisement
Table of Contents
