Table of Contents
Advertisement
delete
To delete IP source guard static entry
Syntax
delete <port-list> <VLAN ID> <ip-address> <mac-address>
Parameter
<port-list> Port list, available value is from 1 to 14 format: 1,3-5..
<VLAN ID> VLAN ID, available value is from 1 to 4094
<ip-address> IP address allowed for doing IP source guard
<mac-address> MAC address, format 0a-1b-2c-3d-4e-5f
EXAMPLE
limit
To set the IP source guard port limitation for dynamic entries
Syntax
limit <port-list> <0-2/ unlimited>
Parameter
<port-list> Port list, available value is from 1 to 14 format: 1,3-5..
<0-2> Specify the maximum number of dynamic clients that can be learned on
given port. If the port mode is enabled and the value of max dynamic client is
equal to 0, it means only allow the IP packets forwarding that are matched in
static entries on the specific port
<unlimited> Unlimited dynamic clients
EXAMPLE
Advertisement
Table of Contents
