Adapting The Beam Pattern From The - Volvo XC 90 Owner's Manual

Twin engine
Hide thumbs Also See for XC 90:
Table of Contents

Advertisement

The function is only active in twilight or darkness
and only when the car is moving.
Deactivating/activating the function
The function is in activated mode when the car is
delivered from the factory and can be deacti-
vated/activated via the centre display in two
ways:
Via the function view
Press the
Active Bending
Lights
button.
Via settings
1. Press
Settings
in the top view.
2. Press
My Car
Lights
Exterior
3. Deselect/select
Active Bending Lights
Related information
Settings view (p. 168)

Adapting the beam pattern from the

headlamps
If the car is equipped with active LED head-
lamps and the Active main beam function is
used, then the headlamp pattern must be reset
when changing from right to left-hand traffic, and
vice versa.
Halogen headlamps
The headlamp pattern does not need to be
adjusted. The headlamp pattern is designed in
such a way that oncoming traffic is not dazzled.
LED headlamps*
Headlamp pattern adjustment is required if the
Active main beam function is used. The car must
be stationary with the engine running when the
headlamp pattern is shifted between right and
left-hand traffic.
Lights.
1. Press
Settings
.
display.
2. Press
My Car
3. Select
Temporary right-hand/left-hand
traffic
.
Related information
Settings view (p. 168)
Activating/deactivating main beam (p. 138)
in the top view in the centre
Lights
Exterior
Lights.
INSTRUMENTS AND CONTROLS
Rear fog lamp
When visibility is reduced by fog the rear fog
lamp can be used so that other road users can
detect the vehicle in front at an early stage.
Button for rear fog lamp.
The rear fog lamp can only be switched on when
ignition position II is active or the engine is run-
ning and the rotating ring on the stalk switch is in
position
or
.
Press the on/off button. The indicator symbol
comes on in the driver display when the
rear fog lamp is on.
The rear fog lamp is switched off automatically
when the engine is switched off or when the
rotating ring on the stalk switch is turned to posi-
tion
or
.
* Option/accessory, for more information, see Introduction.
}}
141

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc90

Table of Contents