Activating And Starting The Adaptive - Volvo XC 90 Owner's Manual

DRIVER SUPPORT
||
Head-up-display*
A flashing symbol attracts the driver's attention.
If the car is fitted with a head-up display the
warning is displayed on the windscreen with a
flashing icon.
WARNING
The adaptive cruise control only warns of
vehicles which its radar unit has detected -
hence a warning may not be given, or it may
be given with a certain delay. Do not wait for a
warning without braking when so required.
Related information
•
Managing the speed of the Adaptive cruise
control* (p. 271)
•
Setting the time interval for the Adaptive
cruise control* (p. 272)
270
•
Change of target and automatic braking with
the Adaptive Cruise Control (p. 275)
•
Activating and starting the Pilot Assist*
(p. 281)
•
Overtaking assistance with the Adaptive
Cruise control* (p. 274)
•
Deactivating/activating the Adaptive cruise
control* (p. 273)
•
Limitations of Pilot Assist* (p. 285)
•
Symbols and messages for the Adaptive
cruise control* (p. 277)
•
Radar unit (p. 286)

Activating and starting the Adaptive

cruise control*
The Adaptive cruise control (Adaptive Cruise
Control - ACC) must first be activated and then
started if it is to control the speed.
Buttons and symbols for functions.
Activate Adaptive Cruise Control
Immediately after the engine is started the Adap-
tive Cruise Control is in the standby mode.
Press ◀ (2) or ▶ (3) to browse to the sym-
–
bol/function (4).
> The symbol is displayed and Adaptive
Cruise Control is set in standby mode.
* Option/accessory, for more information, see Introduction.