Volvo XC 90 Owner's Manual page 162

INSTRUMENTS AND CONTROLS
||
Central locking
Central locking button.
When the car's electrical system is put in at least
ignition position I, the central locking button in
the driver's door or passenger door* can be used
to close the panorama roof.
–
Press and hold the central locking button
and then release.
> The panorama roof and sun blind will start
to move towards the closed position.
Movement stops if the central locking button is
pressed again or when the roof/blind has
reached the closed position.
Door handle
Cars equipped with keyless locking/unlocking*
have a touch-sensitive recess on the outer part of
the outside door handle.
160
– Place your finger against the touch-sensitive
recess on the outside of one of the door
handles until the panorama roof and sun
blind start moving towards the closed posi-
tion.
Movement stops if you place your finger against
the door handle recess again or once the roof/
blind has reached the closed position.
WARNING
If the panorama roof is closed with the remote
control key, the central locking or door handle
check that no one risks being trapped.
IMPORTANT
Check that the panoramic roof is properly
closed when closing.
Pinch protection
The panorama roof has pinch protection that is
triggered if the glass cover or the sun blind is
blocked by an object during closing. In the event
of blocking, the glass cover or sun blind is then
opened automatically to approx. 50 mm from the
blocked position (or to full ventilation position).
The pinch protection is also active when the
glass cover or sun blind is opened.
It is possible to override the pinch protection
when closing has been interrupted e.g. if ice has
formed around the glass cover, by continually
holding the control pressed forward or down until
the glass cover is closed.
Related information
•
Panorama roof* (p. 156)
•
Ignition positions (p. 346)
•
Remote control key (p. 224)
•
Locking/unlocking from the inside (p. 232)
•
Locking/unlocking from the outside (p. 228)
* Option/accessory, for more information, see Introduction.